Maytag Bravos MCT Washer Diagnostic Mode (Quick Guide)

Maytag Bravos MCT Washer Diagnostic Mode (Quick Guide)

To activate the diagnostic mode on a Maytag Bravos MCT washer, begin with the appliance turned off. Rotate the rotary knob to the “3 o’clock” position and press and hold the “Start” button while turning the knob one click clockwise to the “12 o’clock” position.

Release the “Start” button, and the washer will enter diagnostic mode, displaying error codes or diagnostic information on the console.

This mode allows users to perform various tests to identify potential issues and troubleshoot problems within the washing machine. For specific tests and error code interpretations, consult the user manual or online resources for your Maytag Bravos MCT model.

How do I find the error code on my Maytag Bravos washer?

To find the error code on your Maytag Bravos washer, follow these steps:

  • Activate Diagnostic Mode: Start with the washer turned off. Rotate the rotary knob to the “3 o’clock” position.
  • Enter Diagnostic Mode: Press and hold the “Start” button while turning the knob one click clockwise to the “12 o’clock” position. Release the “Start” button.
  • View Error Codes: The washer will enter diagnostic mode, and the console will display error codes or diagnostic information. The specific error code will be indicated by a series of lights on the control panel or displayed on a digital screen.
  • Decode the Error Code: Refer to the user manual or use online resources to interpret the error code. Different codes correspond to specific issues or malfunctions within the washer.

How do I reset my Maytag Bravos washer?

To reset your Maytag Bravos washer, follow these general steps:

  • Power Off: Ensure the washer is powered off and unplugged from the electrical outlet.
  • Wait for a Few Minutes: Allow the washer to remain unplugged for at least a few minutes. This time allows the internal electronics to reset.
  • Power On: Plug the washer back into the electrical outlet.
  • Restart: Turn on the washer and initiate a new wash cycle. This process should effectively reset the appliance.

How do you run a diagnostic on a washing machine?

Running a diagnostic on a washing machine involves accessing its diagnostic mode to identify potential issues or error codes. While the exact steps can vary by brand and model, a common method includes turning off the machine, selecting a specific combination of buttons or dials, and interpreting the displayed information.

Typically, this involves pressing certain buttons or turning a dial to activate diagnostic mode, where error codes or test functions are displayed on the control panel. The user manual for the specific washing machine model provides instructions on how to access the diagnostic mode and interpret any displayed codes. Diagnostic tests can help troubleshoot problems, identify faulty components, and guide repairs. 

Types of Maytag Bravos MCT Washer Diagnostic Modes

Types of Maytag Bravos MCT Washer Diagnostic Modes

Maytag Bravos MCT washers may offer several diagnostic modes to help users identify and address issues. Here are common types of diagnostic modes:

  • Manual Diagnostic Mode: This mode allows users to manually test specific components and functions of the washer, providing a hands-on approach to troubleshooting.
  • Automatic Diagnostic Mode: In automatic diagnostic mode, the washer runs a series of tests on its own to identify and diagnose potential problems. This mode can be more comprehensive in assessing various components.
  • Calibration Diagnostic Mode: Calibration mode is used to ensure precise and accurate operation of the washer’s sensors and components. It helps optimize performance based on load and environmental conditions.
  • User Interface (UI) Diagnostic Mode: UI diagnostic mode focuses on testing and verifying the functionality of the user interface components, such as buttons and display screens, to ensure proper communication with the machine’s control system.
  • Error Code (Fault Display) Diagnostic Mode: This mode displays error codes on the control panel, providing specific information about detected issues. Users can refer to the error codes in the manual to troubleshoot and address problems.

Maytag Washer Diagnostic Codes

Maytag washers use error codes to communicate specific issues or malfunctions. While the exact codes can vary by model, here are some common Maytag washer diagnostic codes:

  • LF: Indicates a long fill time, suggesting an issue with the water supply or inlet valve.
  • F: Typically followed by another code, such as F1, F2, etc., indicating specific faults in different components.
  • Sd: Indicates excessive suds in the washer, possibly due to using too much detergent or the wrong type.
  • Ld: Stands for “Long Drain” and suggests a drainage issue. It could be a clogged drain hose or a problem with the pump.
  • uL: Indicates an unbalanced load. The load may need to be redistributed for proper spinning.
  • oL: Similar to uL, indicating an overload. Adjust the load for balanced spinning.
  • HC: Indicates a hot and cold water supply issue.
Do washing machines have backflow?

How to Exit the Maytag Bravos MCT Washer Diagnostic Mode

Exiting the diagnostic mode on a Maytag Bravos MCT washer is typically straightforward. Once you have completed the diagnostic tests or viewed error codes, follow these general steps to exit the diagnostic mode:

  • Complete Tests: Ensure that you have completed any diagnostic tests or viewed the necessary information during the diagnostic mode.
  • Power Off: Turn the rotary knob to the “Off” position or press the power button to turn off the washer.
  • Unplug or Wait: For an additional measure, you can unplug the washer from the electrical outlet or simply wait for a few minutes.
  • Restart: Plug the washer back in or turn it on. Start a new wash cycle to ensure that the washer is operating normally.


Q: How do I enter the diagnostic mode on my Maytag Bravos MCT washer?

A: Turn the washer off, rotate the knob to the “3 o’clock” position, press and hold the “Start” button while turning the knob to the “12 o’clock” position, and then release the “Start” button.

Q: What does the diagnostic mode on the Maytag Bravos MCT washer allow me to test?

A: The diagnostic mode enables testing of various components, including motor, water inlet valve, door lock, and more, to identify and troubleshoot issues.

Q: Can I run diagnostic tests on individual components using this mode?

A: Yes, the diagnostic mode allows you to perform tests on specific components to check their functionality.

Q: How do I interpret error codes displayed during the diagnostic mode?

A: Consult the user manual for your specific model to interpret error codes, as they can vary. The manual provides details on identified issues and possible solutions.

Q: Can I perform a calibration in the diagnostic mode?

A: Yes, some models may have a calibration diagnostic mode to optimize sensor and component performance based on load conditions.

Q: What should I do if I encounter an error code during diagnostic testing?

A: Refer to the user manual for error code interpretations and follow recommended troubleshooting steps. If in doubt, seek professional assistance.

Q: How often should I run diagnostic tests on my washer?

A: Running diagnostic tests as needed for troubleshooting is recommended. Regular maintenance and checks are advisable to prevent issues.

Q: Is the diagnostic mode the same for all Maytag Bravos MCT washer models?

A: While the general process is similar, specific steps and available tests may vary between models. Refer to your user manual for accurate instructions.

Q: Can I exit the diagnostic mode at any time?

A: Yes, you can exit the diagnostic mode by turning off the washer, unplugging it, waiting, and then restarting it for normal operation.

Q: What if I still have issues after running diagnostic tests?

A: If problems persist, consult the user manual for further guidance, and consider reaching out to Maytag customer support or a professional technician for assistance.

As an Amazon Associate I earn from qualifying purchases.

Jane Francisco

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *